NS-GLSBFSCW1
www.insigniaproducts.com
18
page. When more than two profiles are identified, the profile numbers
are displayed on multiple screens. Press the or buttons to select
profile number you want.
After selecting the correct profile, the measurement results are shown
and then the display turns off. If no profile is selected, the display turns
off after approximately three seconds.
Retrieving data from your scale
1 When the scale is off, press the or buttons to check the
latest analysis record stored in the device. Thes scale the
measurements for the profile of the person who used the scale
last.
2 You can access additional profiles by pressing the or
buttons. The analysis result is displayed once in the following
order: BMI, Body Fat, Total Body Water, Muscle Mass, and Bone
Mass.
If no records are available for the selected profile, the display
shows “no data”.
Note: If the scale fails to identify the likely user, the display shows
only the weight measurement (see Troubleshooting
on page 19).
To Next Page
Loading...
General