14
NS-HAIOR18/NS-HAIOR18-C
www.insigniaproducts.com
Using a USB device
1 Connect a USB flash drive to your shelf system’s USB port.
2 Press SOURCE repeatedly until the display says “USB.”
3 Use your speaker system or remote to control playback and adjust the
volume:
• Press (previous) or (next) to skip to the previous or next
track.
• Press (previous folder) or (next folder) to navigate through
your USB flash drive’s folders.
• Turn the volume knob or press Vol+ or Vol- on your remote to
adjust the volume.
Note
You can charge USB devices through the USB port (5V/1A
output).
Notes
• Depending on the amount of data and the media speed,
it may take longer for the system to read the contents of
the USB device.
• Your shelf system plays MP3 audio files. Even when the
files are in a supported format, some may not play or
display, depending on the content.
To Next Page
Loading...
