Why does the Bluetooth signal fade or drop out on my Insignia Stereo System?
If the Bluetooth signal to your Insignia Stereo System fades or drops out, try shortening the distance between your shelf system and the Bluetooth device. Keep in mind that the maximum connection distance is 33 ft. (10 m), and this distance may be reduced if the wireless signal has to pass through walls or other obstructions.
Why is there no sound in Bluetooth mode on my Insignia Stereo System?
If there is no sound in Bluetooth mode on your Insignia Stereo System, ensure the Bluetooth device is still connected and reconnect if necessary. Make sure you are playing music from your device and that the volume is turned up, and that your Bluetooth device is not muted. Also, ensure that your Bluetooth device is within 33 ft. (10 m) of the shelf system.
Why is there no sound coming from my Insignia Stereo System?
If your Insignia Stereo System has no sound, verify that the power is connected and the system is turned on, including the power switch on the back. Ensure your audio device is also on and playing, with the volume turned up and not muted. Check that the volume isn't too low and the correct source is selected. Confirm all connections are correct and that no wires or cables are damaged. Also, disconnect any headphones, as they mute the sound when connected.
What to do if my Insignia Stereo System remote control does not work?
If your Insignia Stereo System remote control isn't working, first replace the remote batteries. If that doesn't solve the issue, ensure you're aiming the remote at the front of the shelf system and that nothing is blocking the remote sensor.
Why does my Insignia Stereo System say 'No Disc'?
If your Insignia Stereo System displays a “No Disc” error, ensure there's a CD in the disc tray, correctly inserted with the label side up. Verify you're using a compatible disc (CDs, CD-Rs, and CD-RWs in standard or 3” size) and that the disc isn't dirty or scratched.
What should I do if my CD will not play on Insignia Stereo System?
If your CD will not play on Insignia Stereo System, ensure the CD is correctly inserted with the label facing up and that the correct audio source is selected. Clean the CD by wiping outwards from the center with a clean cloth, moistening the cloth slightly if necessary, but avoid using solvents. Also, make sure that your CD is compatible (CDs, CD-Rs, and CD-RWs). If the issue persists, the CD may be damaged; try playing another CD.
How to fix no power on Insignia Stereo System?
If there is no power to your Insignia Stereo System, ensure that the power cord is securely connected to both the shelf system and the power outlet. Also, check that the power switch on the back of the unit is turned on.
Why does my Insignia Stereo System CD skips while playing?
If your Insignia Stereo System CD skips while playing, ensure you're using a standard CD (normal size and shape) or a 3” CD, and that it's a compatible format. Avoid moving the shelf system while it's playing and ensure it's on a flat, steady surface. Clean the CD by wiping outwards from the center with a clean cloth, moistening slightly if needed, but avoid solvents. If the problem continues, the CD may be damaged; try another CD.
What to do if Insignia Stereo System has severe hum or noise or can’t receive FM stations?
If you experience severe hum or noise or can’t receive FM stations on your Insignia Stereo System, ensure that FM reception is adequate. Try moving the antenna or the unit away from potential sources of interference. The FM signal may be weak, so try selecting a different station.
General| Brand | Insignia |
|---|---|
| Model Number | NS-HAIOR18-C |
| Category | Stereo System |
| Bluetooth | Yes |
| CD Player | Yes |
| FM Radio | Yes |
| USB Port | Yes |
| Smart Platform | No |
| Input Voltage | 120V |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 80dB |
| Speaker Type | Full-range |
| Power Output | 18 Watts |
Provides crucial safety guidelines and warnings to prevent damage and ensure proper use of the shelf system.
Provides step-by-step instructions on how to connect the power and turn on the shelf system for the first time.
Explains how to switch between different audio sources like FM, Bluetooth, CD, or USB.
Details how to tune into FM radio stations and manage preset stations.
Details playback controls like play, pause, stop, skip, fast forward, and repeat functions.
Guides users through the process of connecting a Bluetooth device to the shelf system.
Explains how to play audio wirelessly from a paired Bluetooth device.
Solutions for power-related problems and when the remote control is unresponsive.
Addresses issues like 'No Disc' errors, skipping, or discs not playing.
Troubleshooting steps for lack of sound and weak or noisy FM signal reception.
Solutions for no sound or connection issues when using Bluetooth mode.
Resolves problems with pairing Bluetooth devices and maintaining a stable signal.
To Next Page
