Insignia NS-HAIOR18-C User Manual

10
NS-HAIOR18/NS-HAIOR18-C
www.insigniaproducts.com
Selecting the sound equalization
• Press EQ repeatedly to select the sound equalization you want.
Choose one of the following preset options: CLASSIC, POP, JAZZ,
ROCK, or FLAT.
Setting an alarm
1 In standby mode, press and hold PROG on your remote.
2 Press (next) or (previous) to set the alarm hour and minutes,
pressing PROG to save.
3 Press (next) or (previous) to select the the alarm mode (CD,
FM, or USB), then press PROG to save.
4 Press (next) or (previous) to select the alarm volume level
(1-32), then press PROG to save.
Using the FM radio
Tuning to a station
1 Press SOURCE until the display says “FM.”
2 Select a radio station:
• To incrementally tune the radio frequency, press (previous) or
(next).
• To search for the next available station, press and hold
(previous) or (next).
• To skip to a preset station, press PRESET - or PRESET + repeatedly.
Adding a preset station
You can manually program a preset station or automatically program all
stations in range. Your shelf system stores up to 30 stations.
To manually program a preset station:
1 Select the station, then press PROG on your remote.
2 Press PRESET - or PRESET + to select a program number.
3 Press PROG again to save the preset station.
Note
After setting your alarm, press PROG while in standby to turn it
on or off.
Note
See “Adding a preset station“ on page 10 for instructions about
creating preset stations.

Insignia NS-HAIOR18-C Specifications

General

Brand	Insignia
Model Number	NS-HAIOR18-C
Category	Stereo System
Bluetooth	Yes
CD Player	Yes
FM Radio	Yes
USB Port	Yes
Smart Platform	No
Input Voltage	120V
Frequency Response	20Hz - 20kHz
Signal-to-Noise Ratio	80dB
Speaker Type	Full-range
Power Output	18 Watts