Insignia NS-HAIOR18-C - Connecting the FM Antenna; Setting the Clock; Adjusting the Display Brightness

8
NS-HAIOR18/NS-HAIOR18-C
www.insigniaproducts.com
Connecting the FM antenna
1 Connect the FM antenna (included) to the ANTENNA jack on the back
of your shelf system.
2 Adjust the antenna until you find the best reception.
Setting the clock
1 In standby mode, press and hold CLOCK on your remote.
2 Press (next) or (previous) to select a 12-hour (“12H”) or
24-hour (“24H”) clock display, then press CLOCK to save.
3 Press (next) or (previous) to set the hour, then press CLOCK
to save.
4 Press (next) or (previous) to set the minutes, then press
CLOCK to save.
Adjusting the display brightness
• On your remote, press and hold DIM- or DIM+ to dim or brighten
your shelf system’s display.
Note
Press CLOCK on your remote while using the shelf system to
view the time.
Note
To enter standby mode, flip ON the power switch on the back of
your shelf system, but do not press the
standby button the
front.
FM antenna jack
FM antenna