9
DVD Player
www.insigniaproducts.com
Controlling DVD or audio CD playback
• Press (STOP) once to stop playback. Your DVD player remembers where
you stopped. If you press , your DVD player starts playing at the point
where you stopped.
• Press (STOP) twice to stop playback. If you press , your DVD player
starts playing at the beginning of the disc.
• Press to pause playback. Press this button again to resume playback.
• Press to fast-forward the disc. Each time you press this button, the
fast-forward speed changes from 2 to 4 to 8 to 20 times the normal speed.
• Press to fast-reverse the disc. Each time you press this button, the
fast-reverse speed changes from 2 to 4 to 8 to 20 times the normal speed.
• Press (NEXT) to go to the next title, chapter, or track.
• Press (PREV) to go to the previous title, chapter, or track.
Adjusting the volume
• Adjust the volume of playback by turning it up or down on your TV, stereo
system, or home theater.
Programming your DVD player
1 Insert a disc into the DVD player.
2 Press the PROG button on the remote control.
3 Select the chapter number you want to play, from the list on the screen.
4 Press to begin playback.
Using the Setup menus
Your DVD player has a Setup menu you can use to adjust settings.
1 Press SETUP on the remote control. The Setup Menu opens on your TV or
monitor.
2 Press or to highlight an option, then press ENTER to select that option.
3 Press or to change the setting for that option, then press OK to confirm
your selection.
4 Repeat Step 2 through Step 3 to change other menu options.
5 Press SETUP to exit.
NS-HDVD18_17-0080_MAN_V1_ENG.fm Page 9 Thursday, April 20, 2017 4:08 PM
To Next Page
Loading...
