Insignia NS-HF2007 - Page 24

www.insigniaproducts.com
24
58" TV Gaming Stand
STEP 17:
You need:
1 Insert three cam screws (CC) and two dowels (EE) into the left side support (I) and three cam screws and two dowels
into the right side support (J).
2 Tighten the screws with a Phillips screwdriver.
CC Cam screw (6)
EE Dowel (4)
I Left side
support (1)
J Right side
support (1)
Phillips screwdriver
EE
CC