Insignia NS-HF2007 - Page 40

www.insigniaproducts.com
40
58" TV Gaming Stand
STEP 33:
You need:
1 With the grooves in the drawer back (R) and the left and right drawer sides (P and Q) facing inward, insert two
4×38mm screws (PP) through the left and right drawer sides and into the drawer back.
2 Tighten the screws with a Phillips screwdriver.
Phillips screwdriver
R Drawer back (1)
PP 4 × 38 mm screw
(2)
PP
PP
PP
PP