Insignia NS-HFMS80 - STEP 3: Assemble the drawer back panel and the drawer side panels

www.insigniaproducts.com
10
STEP 3: Assembly the drawer back panel and the drawer side panels
You n ee d :
• Attach the drawer back panel (M) between the drawer side panels (N and P) with four 38 mm screws, using a Phillips
screwdriver. The grooves in the drawer panels must line up with each other and face inward.
Z 38 mm screws (4)
M Drawer back panel (1)
N Drawer left side
panel (1)
P Drawer right
side panel (1)
Phillips screwdriver
Metal frame