12
NS-HTMS1
www.insigniaproducts.com
Step 5 – Attach the post to the base
You’ll need
1 Insert the post (16) into the hole on the base (17).
Note: The base (17) is made of plastic with steel structuring underneath. It has
rubber feet which prevent it from sliding.
16 Post (1)
17 Base (1)
18 Lock screw (2)
Phillips screwdriver
NS-HTMS1_19-0634_ASSEMBLY_MAN_V1_EN.fm Page 12 Thursday, October 24, 2019 10:34 AM
To Next Page
Loading...
