Insignia NS-HTVMF0C - Page 13

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in.
13
www.insigniaproducts.com
• DO NOT over-tighten the lag bolts (C1).
.
You’ll need
C3
C1
C2
3 in.
(75 mm)
* Minimum solid concrete thickness: 8 in.
(203mm)
* Minimum concrete block size: 8 x 8 x 16
in. (203 x 203 x 406 mm).
* Minimum horizontal spacing between
fasteners cannot be less than 16 in. (406
mm).
Align the center of the template with the
height mark (a+b) you made in step 4.
C1 (2)
Drill
1/2 in. socket
wrench
Level
C2 (2)
Wall plate template (R)
Tape
Hammer
Wall plate (10)
Wall mount template

3/8 in. masonry
drill bit