Insignia NS-HZ335 User Manual

SETTING UP YOUR SWITCH
1 Connect HDMI cables (not included) from your
source devices to the switch’s INPUT ports.
2 Connect an HDMI cable from your TV (or projector)
to the switch’s OUTPUT port.
3 Connect the power adapter from the DC 5V port to
a power outlet. The power LED and an input LED
light up.
Before using your new product, please read these instructions to prevent any damage.
Flat size (W×H): 8.86 × 4.92 in (225 × 125 mm)
Final folded size: 2.95 × 4.9 in (75 × 125 mm)
PACKAGE CONTENTS
• 3-Port HDMI switch
• Power adapter (Micro USB)
• Quick Setup Guide
Back view
HDTV
or 3D TV
Satellite
receiver
DVD or
Blu-ray
player
Game
console
FEATURES
• HDMI® 3D & 4K video format supported
• HDMI® 2.0 / HDCP 2.2 compliant
• DTS-HD®, Dolby® TrueHD lossless compressed
digital audio compliant
• Plug-and-Play, installs in seconds
• Connect up to three HDMI sources using only one
HDMI port on your TV
• Supports full 4K HDR signals up to 18 Gbps
• Push-button selection for easily changing the input
Note: HDMI cable(s) not included
Your 3-Port HDMI Switch supports the latest 4K video
and next-generation audio signals.
Note: In the unlikely event that a feature is not supported,
neither the picture nor the sound quality would be
degraded.
Power adapter
HDMI
cable
HDMI
cable
HDMI
cable
HDMI
cable
QUICK SETUP GUIDE
3-Port
HDMI Switch
NS-HZ335
Power port
HDMI output
HDMI inputs
Top view
SELECT
Select
button
NS-HZ335_18-0641_QSG_V2_EN.ai 1 11/16/2018 3:50:43 PMNS-HZ335_18-0641_QSG_V2_EN.ai 1 11/16/2018 3:50:43 PM
V2
FINAL
FOR PRINT

Insignia NS-HZ335 Specifications

General

Brand	Insignia
Model	NS-HZ335
Category	Switch
Language	English

Summary

Insignia 3-Port HDMI Switch Features

Package Contents for HDMI Switch

Setting Up Your 3-Port HDMI Switch

Connect HDMI Cables to Input Ports

Connect source device HDMI cables to the switch's INPUT ports.

Connect HDMI Cable to Output Port

Connect an HDMI cable from your TV or projector to the switch's OUTPUT port.

Connect Power Adapter and Check LEDs

Connect the power adapter to the DC 5V port and power outlet.

Using Your HDMI Switch

Turn On TV and Source Devices

Power on your television and connected source devices before proceeding.

Select Source Device Using SELECT Button

Press the SELECT button to cycle through inputs and choose the desired source.

Operate Source Device Normally

Use your selected source device as you normally would for playback.

Specifications for 3-Port HDMI Switch

Troubleshooting HDMI Switch Issues

No Video and/or Audio

Guide for resolving issues with no video or audio signal.

Legal Notices and Compliance

FCC Statement

Compliance information regarding FCC regulations and potential interference.

FCC Caution

Warning about modifications that could void user's authority to operate equipment.

One-Year Limited Warranty Information

Contact Insignia Support