Insignia NS-PCH6441 User Manual

PACKAGE CONTENTS
• USB Type-C/A Hub
• Built-in USB cable
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Computer with a Type-C USB port
Note: USB 3.0 is backward compatible with USB 2.0 and
1.1. However, data transfer speed will be limited to the
speed of the slowest port used.
• Windows® 10, Windows® 8.1, Windows® 8,
Windows® 7, Windows Vista®, Mac OS X 9.0 or
later, Linux, or Kernel 2.4.1 or above
FEATURES
• Two Type-C USB ports
• Two Type-A USB 3.0 ports
• Backward compatible with USB 1.1 and USB 2.0
devices
• Data transfer rate up to 5.0 Gbps (maximum)
Top view
Quick Setup Guide
|
NS-PCH6441
USB Type C/A Hub
Before using your new product, please read these instructions to prevent any damage.
INSTALLING YOUR HUB
• Plug the USB Type-C connector to the USB Type-C
port on your computer.
• To install USB peripherals, plug the devices into
the USB HUB.
• To remove USB peripherals, unplug the devices
from the USB HUB.
• To remove the USB HUB, unplug the USB
connector from your computer.
Cable
Type-C
USB connector
Type-C
USB port
USB 3.0
Type-A
port
USB 3.0
Type-A
port
Type-C
USB port

Insignia NS-PCH6441 Specifications

General

Brand	Insignia
Model	NS-PCH6441
Category	Switch
Language	English