What to do if my Insignia NS-IMK20WH7 Ice Maker makes no ice?
If your Insignia Ice Maker is not producing ice, ensure that the freezer temperature is low enough to make ice. If the temperature is adequate, there may be a mechanical issue with the ice maker. Test or have tested the ejector gear, the ejector motor, the ice mold heater, the holding switch, the water inlet switch, the thermostat, and the water inlet valve.
Why does my Insignia Ice Maker make too much ice?
Your Insignia Ice Maker might be producing too much ice, or not shutting off, because the wire signal arm is jammed. Ensure that the ice maker wire signal arm moves freely. Alternatively, the shutoff switch may be broken, in which case you should call an appliance technician to test the switch.
Why does my Insignia NS-IMK20WH7 Ice Maker ice smell funny or taste bad?
If the ice from your Insignia Ice Maker has a strange smell or bad taste, the ice storage bin or freezer may need cleaning. Empty and wash the ice storage bin, discard the old ice cubes, and wash the interior of the freezer, removing any old food. Also, if you're using a water inlet filter, replace it. Finally, flush out the water supply line in case there are impurities.
Why is the ice discolored in my Insignia NS-IMK20WH7?
If the ice from your Insignia Ice Maker is discolored, it may be due to impurities in the water supply line or the ice mold tray. Flush out the water supply line and clean the ice mold tray. If your refrigerator doesn’t have one, install a water supply line filter.
What to do if the ice tray is not filling in my Insignia Ice Maker?
If the ice tray in your Insignia Ice Maker isn't filling, make sure that the fill tube is correctly inserted into the fill cup opening. Also, check that the water supply valve is turned on and inspect the water supply line for any problems.
What to do if the ice cubes will not eject from my Insignia Ice Maker?
If the ice cubes are not ejecting from your Insignia Ice Maker, there may be a mechanical problem. Test or have tested the ejector gear, the ejector motor, the ice mold heater, the holding switch, and the thermostat.
General| Brand | Insignia |
|---|---|
| Model | NS-IMK20WH7 |
| Product Type | Ice Maker |
| Color | White |
| Ice Shape | Bullet |
| Ice Cube Size Options | Small, Large |
| Power Consumption | 120W |
| Weight | 20.5 lbs |
| Control Type | Electronic |
| Self Cleaning | Yes |
| Ice Production | 26 lb per day |
| Ice Storage Capacity | 1.5 lb |
| Voltage | 115 V |
To Next Page
