Why won't my Insignia NS-IMP26SS7 Ice Maker stop making ice?
The ice maker might not stop making ice because direct or reflected sunlight is causing the sensor to malfunction. Try moving the ice maker to a darker location.
Why is my Insignia NS-IMP26SS7 running but not making ice?
If your ice maker is running but not producing ice, the room or water temperature might be too high. Ensure the room temperature is between 50°F-105° F (10°-40.6° C) and the water temperature is between 40° F - 90° F (4.44° C - 32.2° C).
What to do if the Insignia NS-IMP26SS7 ICE FULL indicator is on?
If the ICE FULL indicator is illuminated, it means the ice basket is full. Simply remove the ice from the basket.
Why is the ADD WATER indicator on my Insignia NS-IMP26SS7 Ice Maker?
The ADD WATER indicator illuminates when the ice maker is out of water. To resolve this, turn off the ice maker, add water up to the maximum level mark, and then press the ON/OFF button to restart the ice maker.
What to do if ice cubes stick together in my Insignia NS-IMP26SS7 Ice Maker?
If the ice cubes are sticking together, it could be due to: * The ice-making cycle being too long: Stop the ice maker, let the ice melt, and then restart it after selecting the SMALL ice cube size. * The water temperature being too cold: Replace the water with warmer water.
Lists essential safety guidelines for operating the ice maker, including handling, placement, and cleaning.
Details specific hazards like electric shock, refrigerant tubing damage, child safety, and component replacement warnings.
Step-by-step guide on how to prepare the ice maker before its first use.
Instructions on how to operate the ice maker to produce ice cubes.
To Next Page
General
