9
26 lb. Portable Ice Maker
www.insigniaproducts.com
Tips on saving energy
• Locate your ice maker in the coolest area of the room, away from heat
producing appliances or heating ducts and out of the direct sunlight.
• Make sure that the appliance is sufficiently ventilated, with adequate air
circulation behind it.
Troubleshooting
Specifications
Caution
Do not try to repair ice maker yourself. Doing so invalidates the
warranty.
Problem Possible cause Possible solution
The ADD WATER
indicator is on
The ice maker is out of water. Turn the ice maker off, add water to the Maximum water level
mark, then press the ON/OFF button to turn on the ice maker.
The ICE FULL indicator
is on
The ice basket is full. Remove the ice from the ice basket.
The ice cubes stick
together
The ice making cycle is too long. Stop the ice maker, wait for the ice to melt, then restart the ice
maker after selecting SMALL sized ice cubes.
The water temperature is too cold. Replace the water with warmer water.
The ice maker runs
through its normal
cycle, but no ice is
formed
The room temperature or water
temperature is too high.
The room temperature should be 50°F-105° F (10°-40.6° C),
water temperature should be 40° F - 90° F (4.44° C - 32.2° C).
The ice maker won’t
stop making ice
Direct or reflected sunlight can
cause the sensor to malfunction.
Move the ice maker to a darker location.
Enclosure NS-IMP26BK7 - plastic
NS-IMP26SS7 - stainless steel
Net Weight 17.8 lbs. (8.1 kg)
Power requirements 120 V ~ 60 Hz
Current Ice making - 1.5 A
Ice harvest - 2.0 A
Dimensions (W x D x H) 9.53 × 14.09 × 12.91 in. (24.2 × 35.8 × 32.8 cm)
Shape of the ice Round
NS-IMP26BK7_NS-IMP26SS7_16-0541_MAN_V1_ENG.fm Page 9 Thursday, October 13, 2016 8:29 AM
To Next Page
Loading...
Need help?
General
