Converter
Adapter plugs
Check out these important
safety instructions to keep
yourself and your devices safe.
• Check the product you intend to connect to the adapter or
converter for the manufacturer’s voltage and wattage rating,
which should be located on the product.
Caution: Adapters alone do not convert voltage. To avoid damaging
your device, do not use adapters without a voltage converter, when
necessary.
• The converter is designed to be used only for short periods of
time (10-15 minutes).
• Do not leave the converter in the power outlet when not in
use.
• Do not continue to use the converter/adapter if it is not
working properly, has been damaged, or dropped in water.
Warning: This product is intended for adult use. This product is NOT
intended for use by unsupervised children. Choose proper settings and
plug in this product before directly supervising children using devices
connected to this product.
BE
CAREFUL!
Quick Setup Guide | NS-MTC1875 / NS-MTC1875-C
All-In-One Travel Adapter
Before using your new product, please read
these instructions to prevent any damage.
PACKAGE CONTENTS
• All-In-One Travel Adapter
(set includes converter and 5 adapter plugs)
• Quick Setup Guide
MAKING SURE YOUR DEVICE IS
COMPATIBLE
1 Determine the voltage of the power outlet you want to use.
See the table on the back for common voltages.
2 Check the voltage of the device you want to connect to the
power outlet.
3 Compare the power outlet voltage to your device’s voltage,
then use the table below to decide which mode to use
(adapter plug only or adapter plug and converter).
Note: The voltage of some devices will be a range. If your power
outlet voltage is in the range of your device’s voltage (for example, a
120-240V device and a 240V power outlet), you do not need the
converter.
Notes:
• Use only an adapter plug for dual-voltage devices (those listed as
110 V/220 V AC, 120 V/240 V AC).
• Use only an adapter plug for devices such as laptop computers and
battery chargers because they automatically adjust to 110V or 220V
power.
The power outlet voltage is:
• The same as your device’s
voltage
• In the range of your device’s
voltage
• 100V and your device is 120V
• In a country with 110-120V AC
• Greater than your device’s
voltage
• In a country with 220-240V AC
• Less than your device’s voltage
Instructions:
Use only an adapter
plug. Skip step 4 and see
“Using your
converter/adapter” for
further instructions.
Use an adapter plug and
the converter. Continue
to step 4.
Your device is not
compatible. Do NOT use
this converter/adapter
set.
Device wattage is:
0-25W
26-1875W
Instructions:
Set the converter to the low
wattage setting. See “Using your
converter/adapter” for further
instructions.
Set the converter to the high
wattage setting. See “Using your
converter/adapter“ for further
instructions.
4 Check the wattage of your device.
If you use an adapter plug with the converter:
High setting (26-1875W)
Low setting (0-25W)
To Next Page
Need help?
General