Insignia NS-OS112 User Manual

1 Connect your speakers
1 Connect the red speaker terminals to the red (+) amplier terminals.
2 Connect the black speaker terminals to the black (-) amplier terminals.
See the documentation that came with your amplier or home theater
system for more information on connecting the cables.
Note: For best performance, speaker wires must be connected correctly. All two-conductor
wire is marked in some way to help with this. One side will be marked with a colored stripe,
raised rib, or dierent-color conductor. Use the marked side for the “red” connections. We
recommend using 18-gauge or heavier speaker wire.
Package contents
• 2-way indoor/outdoor
multipurpose speakers (2)
• Adhesive-backed cushioned
feet for speakers (8)
• Wall-mount brackets (2)
• Adhesive-backed cushions for
mounting brackets (4)
• Screws (4)
• Knobs (4) (For wall mounting)
• Quick Setup Guide
Quick Setup Guide
2-Way Indoor/Outdoor Multipurpose Speakers
I
NS-OS112
Congratulations on your purchase of a high-quality Insignia product. Your 2-Way Indoor/Outdoor Multipurpose Speakers are designed for reliable and trouble-free performance.
2 Position your speakers
Note: If not using the wall-mount brackets, attach the adhesive-backed
cushioned feet to the base of the speakers.
Amplier/home theater system
Note: Make sure to
connect the + terminal on
the speaker to the
+ terminal on the amplier
and connect the - terminal
on the speaker to the
- terminal on the
amplier.
Optional:
Your NS-OS112 speakers can
be mounted to a wall, using
the wall-mount brackets
provided.
NOTE: If you are installing your
speakers outdoors, select
locations facing your listening
area that are protected from
rain and snow, and out of
direct sunlight.
NS-OS112
NS-OS112
Before using your new product, please read
these instructions to prevent any damage.

Insignia NS-OS112 Specifications

Audio Specifications

nominal impedance	8 ohm
frequency response	90Hz - 20kHz

Weight and Dimensions

speaker dimensions without bracket	7.4 H × 4.7 W × 4.1 D in. (18.7 × 11.8 × 10.5 cm)
speaker dimensions with bracket	8.8 H × 4.7 W × 5.6 D in. (22.3 × 11.8 × 14.2 cm)
speaker net weight without bracket	2.2 lbs (1 kgs)
speaker net weight with bracket	2.4 lbs (1.1 kgs)

Summary

Connect Your Speakers

Speaker Terminal Connection

Connect the red speaker terminals to the red (+) amplifier terminals and black to black (-).

Position Your Speakers

Speaker Placement Options

Attach feet for floor placement or use wall-mount brackets; consider outdoor protection.

Install Wall-Mount Brackets

Wall Mount Installation Steps

Steps to attach brackets to the wall, add cushions, and secure speakers using knobs.

Safety Information

Volume and Distortion Warnings

Avoid audio distortion to prevent speaker damage; reduce volume immediately if distortion occurs.

Specifications

90-Day Limited Warranty

Labor Warranty

Covers labor costs for repair or replacement during the warranty period.

Parts Warranty

Covers free new or rebuilt replacement parts during the warranty period.

Contact Insignia