3 Tap the network that you want to connect to, and then tap Connect.
Note
Tap the checkbox next to Connect automatically if you want your tablet to automatically connect to this
network in the future.
4 If prompted, enter a network password, and then tap Next.
Check network status
l The wireless symbol in the taskbar shows your Wi-Fi status:
l (Connected) - You are connected to a network. The more bars you
have, the better your signal strength.
l (Available) - You are not connected to a network, but there are
networks available.
l (Unavailable) - There are no networks available or Wi-Fi is not
turned on.
Connect to a Bluetooth device
Note
Make sure that your tablet and Bluetooth device are no more than 33 feet (10 meters) from each other.
1 Open Settings Devices Bluetooth.
2
If needed, tap the bar to turn on Bluetooth.
3
Put your Bluetooth device in pairing mode. See the instructions that came
with your device for more information.
4 Select your Bluetooth device from the list, and then tap Pair.
5
If your tablet displays a code, enter it on your Bluetooth device.
6
When you are finished, turn off Bluetooth on your tablet or Bluetooth device
to disconnect.
www.insigniaproducts.com
10" FLEX Windows® Tablet with Detachable Keyboard
49
To Next Page
Loading...
