Quick Setup Guide
NS-PRCL01 Projection Clock Radio
Step 1 Get to know your Projection Clock Radio
Check out the front, side, and back panels to familiarize yourself with button controls and connection options. See your User Manual for more information on
buttons and LED.
Congratulations on your purchase of a high-quality
Insignia product. Your NS-PRCL01 represents the state
of the art in projection clock radio design and is
designed for reliable and trouble-free performance.
Package contents
• Projection clock radio
• AC-DC adapter
• CR2032 x 1 battery
• User Guide
• Quick Setup Guide
1 RADIO ON/OFF
2 AM/FM
3 SLEEP
4 PRESET MEMORY
5 SNOOZE/DIMMER
6 TIME SET
7 ALARM 1
8 ALARM 2
9 PROJECT
10 ROTATE
11 Projector lens
12 LCD DISPLAY
13 Projector focus-adjustment ring
14 Projector unit
Front
1 TUNING+/TIME+
2 TUNING-/TIME-
3 PRESET+
4 PRESET–
5 VOLUME+
6 VOLUME-
7 Backup battery
slot
8 DCIN 6V jack
9 ANT
10 SPEAKER
Top
LED
1 RADIO
2 SLEEP
3 SNOOZE
4 VOL
5 MEM
6 Alarm 2
7 Preset station
number
8 Main display
9 Alarm 1
Step 3 Plug in your Projection Clock Radio using the AC adapter
1 Place your clock radio in a convenient place near a power outlet within range
of the AC adapter.
2 Plug the AC adapter into the power outlet.
3 Plug the AC adapter into the DCIN 6V jack on the radio.
Step 2 Install the backup battery
Install the backup battery to maintain the correct time in case the AC power fails.
1 Make sure that the AC adapter is unplugged from the power outlet.
2 Turn your clock radio around so the back is facing forward, then unscrew
the circular backup battery cover.
3 Insert one CR2032 button cell battery (included) into the battery
compartment. Make sure that the + symbol on the battery is facing out.
4 Reinstall the backup battery slot cover.
5 Plug the AC adapter into your clock radio and a power outlet.
To Next Page
General
