Insignia NS-R5101HD User Manual

Quick Setup Guide I NS-R5101HD 5.1 Receiver
Congratulations on your purchase of
a high-quality Insignia product. Your
5.1-channel surround sound receiver
is designed for reliable and trouble-
free performance.
Use this guide for initial setup of your
receiver. If you have questions, see
your User Guide for more information.
Package contents
• Remote control
• AAA batteries
• FM antenna
• AM loop antenna
• Microphone for auto setup
• Quick Setup Guide
• User Guide
1 Install remote control batteries
Remove the cover from the back of the remote control, insert the batteries
as indicated in the battery compartment, then replace the cover.
2 Connect speakers
Position speakers around your room and connect as shown.
Loosen cap, insert speaker wire into the side, then tighten cap.
3 Connect devices
You can connect headphones and one device, such as game console or video camera, to the front of your NS-R5101 receiver.
Headphone Jack
Power
Press to turn off main power before
connecting components.
Input Selector
Turn the knob to switch
between components such
as tuner, DVD, CD, or TV.
ON/STANDBY
Press to turn on your receiver
or put it in standby mode
during normal operation.
Speaker On/Off
Press to turn off speakers
when using headphones or
TV speakers.
Tuning/Preset
Press TUNING buttons to choose an AM
or FM radio station. Press PRESET buttons
to choose a saved station.
Volume
Video 3 Input
Connect a game console
or video camera here.
BAND
Press to select
the radio band,
FM, FM-MONO,
or AM.
Microphone
FM antenna
AM loop antenna
AAA batteries
Remote
control
1 TV or screen 5 Front right speaker
2 Front left speaker 6 Surround back left speaker
3 Subwoofer 7 Surround back right speaker
4 Center speaker 8 Listening position
Power amplifi er
Surround back
speakers
Powered subwoofer
Front
right
Front
left
Center
Surround
right
Surround
left

Insignia NS-R5101HD Specifications

General

Power Output	50 watts per channel
Number of Channels	2
Tuner Type	AM/FM
Remote Control	Yes
Input Impedance	47k ohms
Frequency Response	20 Hz - 20 kHz
Input Sensitivity	200mV
AM/FM Presets	30
Speaker Impedance	8 ohms
Headphone Jack	Yes
Outputs	Speaker terminals, Subwoofer output
Total Harmonic Distortion	0.08%

Summary

Initial Setup and Connections

Install Remote Control Batteries

Install batteries into the remote control for operation.

Connect Speakers

Position and connect surround sound speakers to the receiver.

Connecting Audio and Video Devices

Connecting Various Audio Sources

Connect audio sources like CD players, DVD players, and game consoles to the receiver.

Connecting a VCR

Detailed steps for connecting a VCR using audio and video cables to the receiver.

Connecting Media Players and TVs

Connecting Blu-ray/DVD Players

Connect Blu-ray/DVD players via HDMI, Component, or Composite video.

Connecting TVs

Connect TVs via HDMI, Component, or Composite video and audio.

Connecting Cable TV or Satellite Boxes

Connect Cable/Satellite boxes via HDMI, Component, or Composite video.

Connecting Front AV Devices

Connect devices to the front AUX 1 jacks for video and audio input.

Connecting Digital Audio

Connect digital audio sources via coaxial or optical cables.

Powering On and Setup Completion

Connect Power

Connect the receiver to a power outlet and turn it on.

Auto Speaker Setup

Use the supplied microphone to automatically adjust speaker settings.

Complete Setup

Switch between input sources and adjust sound parameters.