3 Move the ball head to point the camera into position, then screw (turn
clockwise) the lock screw against the ball head to lock it in place.
4 Wrap all three tripod legs completely around a secure object or place
on the oor or a tabletop.
Caution: Not wrapping the legs completely around an object, or
attaching to an unsteady object, could result in damage to the tripod or
equipment mounted on the tripod.
5 To remove your camera from the tripod, unscrew the lock screw to
release the ball head, then hold the camera in place and rotate the ball
head clockwise.
IMPORTANT SAFETY INSTRUCTIONS
• Do not store or expose your tripod to excessive heat or cold, or use near
any ame or re.
• Do not oil or grease any part of the tripod.
• Do not use any solvents or thinners to clean your tripod. Use only a mild
detergent and wipe dry with a soft, lint-fee cloth.
• Do not exceed the load limit (1.8 lb or 0.8 kg) of this product.
SPECIFICATIONS
• Folded height: 6" (15 cm)
• Load capacity: 1.8 lb (0.8 kg)
• Weight: 1.8 oz. (52 g)
• Mounting screw: 1/4"
V2 ENGLISH 15-0358
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
NS-SFLX6B-C_15-0358_QSG_EN_V2.ai 2 4/9/2015 10:52:54 AMNS-SFLX6B-C_15-0358_QSG_EN_V2.ai 2 4/9/2015 10:52:54 AM
To Previous Page
Loading...
Need help?
General
