19
1.6 Cu. Ft. Portable Top-Load Washer
www.insigniaproducts.com
Installing your washer
Tools you will need
Step-by-Step instructions
Step 1: Select a location
Before you install your washer, make sure that the location:
• Is a hard, level surface without carpeting or soft flooring that can obstruct
ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (32° F or 0° C).
• Is away from heat sources such as oil or gas.
• Has enough space so that the washer does not rest on its power cord.
Step 2: Move your washer to the selected location
1 Tilt your washer onto its rear rollers.
2 Move your washer to the selected location.
Step 3: Install the bottom cover
1 Slide the bottom cover into the slots on the bottom of your washer.
2 Attach the bottom cover to you washer using a Phillips screwdriver and the
screw that was attached to your washer.
Pliers
Phillips screwdriver
Level
To Next Page
Loading...
