24
NS-TWM16WH9
www.insigniaproducts.com
Step 5: Connect the drain hose
• Position the loose end of the drain hose in one of the following ways:
• Over the edge of a wash basin - Secure the guide to the side of the basin
wall with a hook, tape it, or tie it with a piece of cord to prevent the drain
hose from moving.
• In a standpipe - The standpipe must be no shorter than 32 in. (81 cm) and
no longer than 39 in. (100 cm).
Caution: Make sure that the connection between the drain hose and the wash basin,
standpipe, or laundry tub is not airtight.
39 in. (81 cm) max.
32 in. (81 cm) min.
Hose retainer
Tie strap
To Next Page
Loading...
