What to do if my Insignia NS-WHP314 is not charging?
If your Insignia Headphone isn't charging, ensure that the charging contacts on the headphone and the charging pins on the docking station are making good contact. You might need to gently rock them back and forth to establish a solid connection.
What to do if there is no sound from my Insignia NS-WHP314 Headphone?
If you're not getting any sound from your Insignia Headphone, here are a few things to check: * Make sure the headphone volume isn't too low, and check the volume of the audio sources connected to the docking station. * Verify that all cables are correctly connected. * Check that the Power/Pairing indicators on both the headphones and the docking station are steadily lit. * Ensure the audio source doesn't have internal/external speaker settings that are turning off the internal speakers. * Confirm that your audio source is not muted. * To maximize volume, ensure your audio source (like a TV or MP3 player) is set to at least 50% of its maximum volume.
Why is there sound interference in my Insignia NS-WHP314 Headphone?
Sound interference with your Insignia Headphone can be frustrating. Try these solutions: * Move the docking station slowly to find the best reception position for your headphones. * Shorten the distance between your headphones and the docking station. * Make sure that all of the cables are connected correctly. Other devices like cordless phones, microwaves, or wireless routers may be causing interference. Try turning off one device at a time to determine which one is the culprit. If a cordless phone or wireless router is the cause, try changing its channel.
How to fix no communication between Insignia Headphone and docking station?
If your Insignia Headphone isn't communicating with the docking station, verify that: * The AC adapter is properly connected to the docking station. * The docking station is powered on. * The headphone batteries are adequately charged. * The Power/Pairing indicator on the headphones and the Pairing indicator on the docking station are illuminated. If they are lit steadily, a connection has been established. If they are blinking, see 'Using the headphones' on page 11.
What to do if there is sound coming from the audio source on my Insignia NS-WHP314?
To resolve sound coming from the audio source when using your Insignia Headphone, turn off the internal speakers of your audio sound source.
General| Brand | Insignia |
|---|---|
| Model | NS-WHP314 |
| Type | Over-Ear |
| Driver Size | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Bluetooth Version | 4.0 |
| Impedance | 32 ohms |
| Charging Time | 2 hours |
| Sensitivity | 105 dB |
| Cable Length | 1.2 m |
| Plug Type | 3.5 mm |
| Connectivity | Bluetooth |
Lists all items included in the Insignia wireless headphones box.
Step-by-step guide for connecting the wireless headphones to the docking station.
Instructions on how to connect the AC adapter to the docking station and power outlet.
Guide on placing headphones on the docking station for charging and indicator lights.
Instructions for turning the system on, pairing, and general operation.
Steps for listening to audio wirelessly through the headphones.
Procedures for properly powering down the headphones and docking station.
Guidelines for the proper disposal of electronic equipment according to national legislation.
Details warranty period, what is covered, exclusions, and definitions.
Instructions on how to get service, where the warranty is valid, and contact information.
To Next Page
