25
24" 720p 60Hz LED TV
www.insigniaproducts.com
Analog audio
When you connect an analog speaker system or soundbar to the /AUDIO OUT jack, the TV speakers are muted.
1 Make sure that your TV’s power cord is unplugged and the analog speaker system or soundbar is turned off.
2 Connect an audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the AUDIO IN jacks
on the analog speaker system or soundbar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or soundbar.
5 On your TV, set the Headphone/Audio Out option on the Audio menu to Headphones/Audio Out Variable or
Audio Out Fixed. See the Headphone/Audio Out option in Adjusting sound settings on page 42.
Audio cable
Analog speaker system
Side of TV
Audio cable
connector
/AUDIO OUT
jack
On your TV
Soundbar
To Next Page
Loading...
