InSinkErator Model SS-200 - User Manual

PROJECT: ITEM NO.:
Heavy-duty disposer designed for continuous operation in restaurants, hotels, hospitals and cafeterias. Food waste including
steak bones is quickly and efficiently removed with this labor-saving, self-cleaning, environmentally sound disposer.
CC-202 Control Center
(Auto-Reversing)
CC-101 Control Center
(Auto-Reversing)
AS-101 Control Center
“Aqua Saver”
(Auto-Reversing)
Our products appear on The KCL CADalog
CD-ROM based CAD Foodservice Symbol
Library. More information is available from
Kochman Consultants, Ltd.
at www.kclcad.com.
Manual Switch
(Single Direction)
Manual Reverse Switch
(Dual Direction)
1-1/2 – 2 H.P. DISPOSER MODELS
MODEL & HORSEPOWER/ELECTRICAL REQUIREMENTS
115/208-230V, 60 Hz, 1 Ph, 12.2/5.7/6.1 amps, UL
208-230/460V, 60 Hz, 3 Ph, 3.2/4.6/2.3 amps, UL
115/208-230V, 60 Hz, 1 Ph, 12.2/5.7/6.1 amps, UL, short body
208-230/460V, 60 Hz, 3 Ph, 3.2/4.6/2.3 amps, UL, short body
115/208-230V, 60 Hz, 1 Ph, 12.2/5.7/6.1 amps, CSA
SS-150
1-1/2 H.P.
InSinkErator ©2008 Printed in USA Form No. F308-08J-45-02
InSinkErator is a division of Emerson Electric Co.
4700 21st STREET
RACINE, WI 53406
TEL: 800-845-8345
FAX: 262 554-3620
www.insinkerator.com
The Emerson logo is a
trademark and a service mark
of Emerson Electric Co.
ELECTRICAL CONTROLS
SPECIFICATIONS
• Grind Chamber: Corrosion Resistant Stainless Steel
• Mounting: 3/4" (19.1 mm) rubber mounting above grinding chamber isolates sound and
eliminates vibration. Mounting is enclosed in chrome plated covers for sanitation and appearance.
• Motor: 1-1/2 – 1 HP Induction Motor, 1725 RPM, totally enclosed to provide protection against
outside moisture. Controlled power air flow cools motor for effciency and longer life. Built-in
thermal overload protection.
• Cutting Elements: Stationary and rotating shredding elements made from cast nickel chrome
alloy for long life and corrosion resistance, designed for reverse action grinding.
• Main Bearings: Double-tapered Timken roller bearings provide a shock absorbing cushion.
• Motor Seals: Triple lip seal protects motor from water damage. Secondary spring-loaded oil
seal provides double protection against water and loss of grease.
• Finish: All Stainless Steel and Chrome plated. Paint-free for lasting sanitation.
• Warranty: 1 year full warranty from date of installation.
• A Disposer Package Includes: 1 Mounting/Bowl Assembly, 1 Electrical Control, 1 Syphon
Breaker, 1 Solenoid Valve, and 1 Flow Control Valve. The standard Flow Control Valve will be
sent with the unit unless the optional valve is specified.
115/208-230V, 60 Hz, 1 Ph, 17.4/7.7/8.7 amps, UL
208-230/460V, 60 Hz, 3 Ph, 3.3/5.0/2.5 amps, UL
115/208-230V, 60 Hz, 1 Ph, 17.4/7.7/8.7 amps, UL, short body
208-230/460V, 60 Hz, 3 Ph, 3.3/5.0/2.5 amps, UL, short body
NOTE: All amp ratings denote amp draw during a grind load.
208-230/460V, 60 Hz, 3 Ph, 3.2/4.6/2.3 amps, CSA
115/230V, 50 Hz, 1 Ph, 10.3/5.6 amps
230/460V, 50 Hz, 3 Ph, 3.0/1.5 amps
380V, 50 Hz, 3 Ph, 1.7 amps
115/208-230, 60 Hz, 1 Ph, 17.4/7.7/8.7 amps, CSA
208-230/460V, 60 Hz, 3 Ph, 3.3/5.0/2.5 amps, CSA
208-240/460V, 60 Hz, 3 Ph, 3.3/5.0/2.5 amps, NOM
SS-200
2 H.P.

Summary

Specifications

Grind Chamber

Corrosion Resistant Stainless Steel grind chamber for durability and sanitation.

Mounting System

Rubber mounting isolates sound and vibration, enclosed in chrome plated covers.

Motor Details

1-1/2 - 1 HP Induction Motor, 1725 RPM, totally enclosed with thermal overload protection.

Cutting Elements

Stationary and rotating shredding elements made from cast nickel chrome alloy.

Bearings and Seals

Double-tapered Timken roller bearings and triple lip motor seals for protection.

Finish and Warranty

All Stainless Steel and Chrome plated finish, with a 1 year full warranty.

Disposer Package Contents

Includes mounting/bowl assembly, electrical control, siphon breaker, solenoid valve, flow control valve.

Model and Electrical Requirements

SS-150 1-1;2 H.P. Requirements

Electrical requirements for the SS-150 disposer model, including various voltage and amperage ratings.

SS-200 2 H.P. Requirements

Electrical requirements for the SS-200 disposer model, including various voltage and amperage ratings.

Electrical Controls Overview

Control Center Options

AS-101, CC-101, and CC-202 Control Centers for Auto-Reversing operation.

Manual Switch Options

Manual Reverse Switch for dual direction and Manual Switch for single direction operation.

Disposer Mounting Assemblies

Bowl Mount Types

Type A, B, and C sink bowl assemblies with varying components.

Sink Bowl Assembly Sizes

Available sink bowl assembly sizes with one or two adjustable water nozzles.

Collar Mount Types

Sink flange mounting assemblies and collar adaptors for sink integration.

Dimensions and Installation

Disposer Dimensions Chart

Detailed dimensions for bowl sinks and adaptors, including height specifications.

Recommended Installation Diagram

Diagram illustrating the typical installation of the disposer with water and electrical connections.

Recommended Water Usage

Standard and optional water flow rates (GPM/LPM) for SS-150 and SS-200 models.

InSinkErator Model SS-200 Specifications

General

Brand	InSinkErator
Model	Model SS-200
Category	Garbage Disposal
Language	English