InSinkErator Model SS-75

To Next Page

PROJECT: ITEM NO.:

Heavy-duty disposer designed for continuous operation in restaurants, hotels, hospitals and cafeterias. Food waste including

steak bones is quickly and efficiently removed with this labor-saving, self-cleaning, environmentally sound disposer.

CC-202 Control Center

(Auto-Reversing)

CC-101 Control Center

(Auto-Reversing)

AS-101 Control Center

“Aqua Saver”

(Auto-Reversing)

Our products appear on The KCL CADalog

CD-ROM based CAD Foodservice Symbol

Library. More information is available from

Kochman Consultants, Ltd.

at www.kclcad.com.

Manual Switch

(Single Direction)

Manual Reverse Switch

(Dual Direction)

1/2 – 1-1/4 H.P. DISPOSER MODELS

MODEL & HORSEPOWER/ELECTRICAL REQUIREMENTS

115/208-230V, 60 Hz, 1 Ph, 8.4/4.0/4.2 amps, UL

208-230/460V, 60 Hz, 3 Ph, 2.0/2.2/1.1 amps, UL

SS-50

1-1/2 H.P.

115/208-230V, 60 Hz, 1 Ph, 8.4/4.0/4.2 amps, CSA

208-230/460V, 60 Hz, 3 Ph, 2.0/2.2/1.1 amps, CSA

115/208-230V, 60 Hz, 1 Ph, 10.0/4.2/5.0 amps, UL

208-230/460V, 60 Hz, 3 Ph, 2.5/3.0/1.5 amps, UL

115/208-230V, 60 Hz, 1 Ph, 10.4/4.3/5.0 amps, CSA

208-230/460V, 60 Hz, 3 Ph, 2.5/3.0/1.5 amps, CSA

SS-75

3/4 H.P.

115/230V, 50 Hz, 3 Ph, 7.7/3.7 amps

230/460V, 50 Hz, 3 Ph, 2.7/1.4 amps

380V, 50 Hz, 3 Ph, 1.1 amps

InSinkErator is a division of Emerson Electric Co.

4700 21st STREET

RACINE, WI 53406

TEL: 800-845-8345

FAX: 262 554-3620

www.insinkerator.com

ELECTRICAL CONTROLS

SPECIFICATIONS

• Grind Chamber: Corrosion Resistant Stainless Steel

• Mounting: 3/4" (19.1 mm) rubber mounting above grinding chamber isolates sound and eliminates

vibration. Mounting is enclosed in chrome plated covers for sanitation and appearance.

• Motor: 1/2 – 1-1/4 HP Induction Motor, 1725 RPM, totally enclosed to provide protection against

outside moisture. Controlled power air flow cools motor for efficiency and longer life. Built-in

thermal overload protection.

• Cutting Elements: Stationary and rotating shredding elements made from cast nickel chrome

alloy for long life and corrosion resistance, designed for reverse action grinding.

• Main Bearings: Double-tapered Timken roller bearings provide a shock absorbing cushion.

• Motor Seals: Triple lip seal protects motor from water damage. Secondary spring-loaded

oil seal provides double protection against water and loss of grease.

• Finish: All Stainless Steel and Chrome plated. Paint-free for lasting sanitation.

• Warranty: 1 year full warranty from date of installation.

• A Disposer Package Includes: 1 Mounting/Bowl Assembly, 1 Electrical Control, 1 Syphon

Breaker, 1 Solenoid Valve, and 1 Flow Control Valve. The standard Flow Control Valve will be

sent with the unit unless the optional valve is specified.

115/208-230V, 60 Hz, 1 Ph, 11.6/5.1/5.7 amps, UL

208-230/460V, 60 Hz, 3 Ph, 2.2/3.0/1.5 amps, UL

115/208-230V, 60 Hz, 1 Ph, 11.6/5.1/5.7 amps, CSA

SS-100

1 H.P.

208-230/460V, 60 Hz, 3 Ph, 2.2/3.0/1.5 amps, CSA

120/208-240V, 60 Hz, 1 Ph, 11.6/5.1/5.7 amps, NOM

100/200-230V, 50/60 Hz, 1 Ph, 10.4/5.2/5.4 amps

115/208-230V, 60 Hz, 1 Ph, 12.8/5.9/6.6 amps, UL

208-230/460V, 60 Hz, 3 Ph, 2.6/3.3/1.9 amps, UL

SS-125

1-1/4 H.P.

115/208-230V, 60 Hz, 1 Ph, 12.8/5.9/6.6 amps, CSA

208-230/460V, 60 Hz, 3 Ph, 2.6/3.3/1.9 amps, CSA

NOTE: All amp ratings denote amp draw during a grind load.

The Emerson logo is a

trademark and a service mark

of Emerson Electric Co.

Need help?

Do you have a question about the InSinkErator Model SS-75 and is the answer not in the manual?

Summary

Product Specifications

Grind Chamber Material

Specifies the corrosion-resistant stainless steel construction of the grind chamber.

Mounting System

Details the rubber mounting for sound isolation and chrome-plated covers.

Motor Type and Protection

Describes the 1/2-1-1/4 HP induction motor, enclosed design, and thermal overload protection.

Cutting Elements

Notes the stationary and rotating elements made of cast nickel chrome alloy for reverse action grinding.

Bearing System

Highlights the double-tapered Timken roller bearings for shock absorption.

Motor Seal Protection

Explains the triple lip seal and secondary spring-loaded oil seal for water protection.

Overall Finish

States the finish is all stainless steel and chrome plated, paint-free for sanitation.

Warranty Information

Specifies a 1-year full warranty from the date of installation.

Disposer Package Contents

Lists items included: mounting/bowl assembly, control, siphon breaker, solenoid, flow control valve.

Model and Electrical Requirements

SS-50 (1-1;2 H.P.) Electrical Needs

Details electrical specifications for the SS-50 model, including voltage, phase, and amperage ratings.

SS-75 (3;4 H.P.) Electrical Needs

Details electrical specifications for the SS-75 model, including voltage, phase, and amperage ratings.

SS-100 (1 H.P.) Electrical Needs

Details electrical specifications for the SS-100 model, including voltage, phase, and amperage ratings.

SS-125 (1-1;4 H.P.) Electrical Needs

Details electrical specifications for the SS-125 model, including voltage, phase, and amperage ratings.

Electrical Control Options

AS-101 Control Center

Identifies the AS-101 'Aqua Saver' control center with auto-reversing functionality.

CC-101 Control Center

Identifies the CC-101 control center featuring auto-reversing capabilities.

CC-202 Control Center

Identifies the CC-202 control center designed with auto-reversing functionality.

Manual Reverse Switch

Describes the manual switch option for dual direction operation.

Manual Switch

Describes the manual switch option for single direction operation.

Disposer Mounting Assemblies and Dimensions

Bowl Mount Types

Details Type A, B, and C sink bowl assemblies including components like bowl cover and splash baffle.

Sink Bowl Assembly Sizes

Lists available sink bowl assembly sizes: 12", 15", and 18", with nozzle details.

Collar Mount Types

Describes #5, #6, and #7 collar mounting assemblies for sink openings and welding.

Dimension Chart

Provides a chart detailing bowl sinks, flange O.D., work table hole, flange I.D., and height measurements.

Adaptor Dimensions

Lists dimensions (X, Y, Z) for sink opening adaptors No. 5, No. 6, and No. 7.

Recommended Water Usage

SS-50 Water Usage

Specifies standard and optional water usage for the SS-50 model in GPM and LPM.

SS-75 Water Usage

Specifies standard and optional water usage for the SS-75 model in GPM and LPM.

SS-100 Water Usage

Specifies standard and optional water usage for the SS-100 model in GPM and LPM.

SS-125 Water Usage

Specifies standard and optional water usage for the SS-125 model in GPM and LPM.