Pg. 16 V12192022_CG3.1PK
GENERAL MAINTENANCE INFORMATION
• Periodically inspect the cables for splitting, cracking or fraying. Also, watch for bulging or at areas in the cable. Pay
particular attention to the cable ends.
• Immediately replace cables at the rst signs of damage or wear. Never use equipment with damaged or worn cables.
• Cables naturally stretch over time, so check cable slack periodically and adjust cable tension as needed.
• Regularly inspect product for loose hardware.
• Do not use or store equipment outdoors.
• Inspect snap links, swivels, handles, and weight stack pins for wear or damage. If wear or damage exists,
replace immediately.
• Locate and familiarize yourself with all warning decals on the machine.
• Periodically wipe down guide rods with a dry cloth and re-apply a thin coat of a Teon-based lubricant.
MAINTENANCE SCHEDULE
ROUTINE HOME MAINTENANCE ENTRY DATE
Inspect: Links, Pull Pins, Spring Clips,
Swivels, Weight Stack Pins
WEEKLY
Clean: Upholstery
WEEKLY
Inspect: Cables and their Fittings
WEEKLY
Inspect: Tautness of all Shrouds
WEEKLY
Inspect: Accessory Bars and Handles
3 MONTHS
Inspect: All Decals
3 MONTHS
Inspect: All Nuts and Bolts.
Tighten if Needed
3 MONTHS
Inspect: Anti-Skid surfaces
3 MONTHS
Clean and Lubricate: Guide Rods
with a Teon based lubricant
3 MONTHS
Lubricate: Seat Sleeves and
all Plastic Slides
3 MONTHS
Clean and Wax: All Glossy Finishes
YEARLY
Replace: Cables, Belts and
Connecting Parts
2 YEARS
To Next Page
Loading...
Need help?
General
