Inspire LEG PRESS 2 OPTION User Manual

2 – 5” Hex Bolts 1 – 4 ¾” Hex Bolt 1 – 3 ¾” Hex Bolt
4 – 3/8” Flat Washers 1 – 3/8” Flat Washer 1 – 5/16” Barrel Spacer
2 – 3/8” Lock Nuts 2 – 3/8” Flat Washers
1 – 3/8” Lock Nut
1 – 3 ½” Pulley
1 – 1” Barrel Spacer
Leg Press Base Attachment Arm
2 – 4 ¼” Hex Bolts
Home Gym 4 – 3/8” Flat Washers
2 – 3/8” Lock Nuts
Step 4: Attach Attachment Arm and Swivel Pulley Bracket to Home Gym using:
Two (3/8” x 4 ¼” Hex Bolts)
(Finger Tighten Only) Four (3/8” Flat Washers)
Two (3/8” Lock Nuts)
Step 5: Attach Attachment Arm to Main Upright using: One (3/8” x 3 ¾” Hex Bolt)
Note: Re-install Pulley 1 & 1” Barrel Spacer One (5/16” Barrel Spacer)
in original location Two (3/8” Flat Washers)
(Finger Tighten Only) One (3/8” Lock Nut)
One (3 ½” Pulley)
One (1” Barrel Spacer)
Step 6: Attach Leg Press Base to Attachment Arm using: Two (3/8” x 5” Hex Bolts)
One (4 ¾” Hex Bolt)
Five (3/8” Flat Washers)
(Wrench Tighten all Bolts in Steps 4 - 6 Now) Two (3/8” Lock Nuts)
Page 10
S
TEP
4
STEP 6
S
TEP
5
5/16” Barrel Spacer

Inspire LEG PRESS 2 OPTION Specifications

General

Brand	Inspire
Model	LEG PRESS 2 OPTION
Category	Fitness Equipment
Language	English