Inspire LEG PRESS OPTION User Manual

Back Pad Stem
2 – 1” Hex Bolts
2 – 3/8” Flat Washers
2 – 2 ½” Hex Bolts
Back Pad 4 – 3/8” Flat Washers
2 – 3/8” Lock Nuts
Handles
Seat Pad
Foot Plate
Leg Press Base
1 – ½” x 5” Hex Bolt
2 – ½” Flat Washers
1 – ½” Lock Nut
2 – 2 ¼” Hex Bolts
2 – 3/8” Flat Washers
Step 20: Attach Handles to Leg Press Base using: Two (2 ½” Hex Bolts)
(Wrench Tighten Bolts) Four (3/8” Flat Washers)
Two (3/8” Lock Nuts)
Step 21: Slide Back Pad Stem into Leg Press Base, Then
Attach Back Pad to Back Pad Stem using: Two (1” Hex Bolts)
(Wrench Tighten Bolts) Two (3/8” Flat Washers)
Step 22: Attach Seat Pad to Leg Press Base using: Two (2 ¼” Hex Bolts)
(Wrench Tighten Bolts) Two (3/8” Flat Washers)
Step 23: Attach Foot Plate to Press Arm using: One (1/2” x 5” Hex Bolt)
(Wrench Tighten Bolts) Two (1/2” Flat Washers)
One (1/2” Lock Nut)
Page 16
STEP 20
STEP 21
STEP 22
STEP 22

Inspire LEG PRESS OPTION Specifications

General

Brand	Inspire
Model	LEG PRESS OPTION
Category	Fitness Equipment
Language	English