THIS MACHINE IS DESIGNED TO BE OPERATED BY ONE OPERATOR ONLY
- 1 -
Congratulations!
Your selection of the Insta Graphic Systems®
(IGS) heat seal machine is a sound business
decision. IGS equipment is the result of the
highest quality engineering and time-tested
design. Your new machine combined with IGS's
reputation of innovation in the heat-seal
industry, insures the continuing capability of
delivering the best-decorated substrates possible.
This manual describes installation, operation,
and maintenance procedures for your new
model 414 machine.
Your model 414 machine will have a long
trouble-free life. Read this manual. Keep it with
your machine; it's your key to proper operation
and lasting service.
Installation
DOMESTIC
Use a 15 amp AC circuit. Only
industrial weight extension cords
with proper wire size should be
used: size 18/3 wire for distances up
to 25 feet, and size 16/3 for
distances up to 50 feet.
INTERNATIONAL
Only industrial extension cords
with proper wire size (2.5 mm sq.)
shall be used.
IMPORTANT
The appliance must be plugged into
a proper receptacle of the proper
size and rating. Equally important,
the line voltage must be able to
accommodate this appliance as well
as other appliances operating on this
circuit.
Specifications
Electrical 120 Vac, 50/60 Hz, 400 W
240 Vac, 50/60 Hz, 400 W
Weight 33 Pounds (14.5 KG)
Limited Machine Warranty
Insta Graphic Systems® (IGS) warrants this heat
seal machine, when operated under normal con-
ditions, to be free from manufacturing defects in
material and workmanship for a period of one
year on parts (lifetime on the upper heating
element) and 90 days on labor from the invoice
date.
This warranty will be effective only when IGS
authorizes the original purchaser to return the
product to the factory in Cerritos, California
freight prepaid, and only when the product
upon examination has proven to be defective.
This warranty does not apply to any machine
that has been subjected to misuse, negligence or
accident.
IGS shall not be liable for the injury, loss or
damage, direct or consequential, arising out of
the use or the inability to use the product.
No claim of any kind shall be greater in amount
than the sale price of the product or part to
which claim is made.
This is the sole warranty given by the company, it is
in lieu of any other warranties, expressed or implied,
in law or in fact, including the warranties of
merchantability and fitness for a particular use, and
is accepted as such by the purchaser in taking
delivery of this product.
Safety Summary
WARNING
In case of power cord damage, do
not attempt to repair or replace the
power cord. Contact the manufac-
turer or the local distributor.
WARNING
Avoid touching hot surfaces while
operating the machine.
CAUTION
During normal operation, the base
of the machine must be installed or
placed above the wall socket.
To Next Page
Loading...