Insta360 ONE R Basic Operation

Assembly Steps:
1） Align the holes on the side of the lens mod to the points on the Core, and press the two
together until they firmly connect.
2) Align the already assembled Core and lens mods to the connecting points of the Battery Base.
Then press the two parts together until they firmly connect.
*Pro Tip:
1) Avoid disassembling or storing a dissassembled ONE R in high humidity environments, as
camera could be damaged.

Insta360 ONE R Specifications

General

Material	Fabric
Case type	Hard shell case
Product color	Gray

Weight and Dimensions

Depth	142 mm
Width	220 mm
Height	74 mm
Weight	242 g