Titan does not have maximum capacity limits on the SD card
.
Note for removing the storage card
As the file directory structure is more complex in Titan
,
please make sure to turn o
ff
the camera before pulling out
storage cards
.
If the storage card is pulled out when the camera is on
,
files may fail to be stored completely in very
few cases
.
Therefore please make sure to turn o
ff
the camera first before removing any storage card
.
How to use the camera to format an SD card
Frequent recording of high
-
resolution video will lead to accumulation of data fragments generated by multiple files
,
a
ff
ecting the card speed
.
So
,
it is recommended to periodically format storage devices
,
especially before important
shooting
.
Titan features standby formatting and it
'
s easy to operate
.
Using the Titan camera to format saves hours and is more
completed than using computer so
ware
.
It is strongly recommended to use the camera to format storage devices
.
Detailed operation steps are shown below
.
1.
Select camera settings on the screen menus
,
sequentially
,
Settings
-
Storage
-
Storage Space
2.
Under this menu
,
you can view the amount of available capacity
/
residual capacity information of storage
devices inserted in the current camera
.
Press the Power button to click on a storage device into the next step to
be formatted
,
and then the camera will remind you whether to proceed with formatting
,
continue to click on the
Power button to confirm and then it will start to format the selected storage device
.
(
Please note that before
formatting
,
you must backup the original data on storage devices and the data cannot be restored once
formatting completes
.
)
(
1
)
Once formatted
,
if you are prompted by Formatted success
,
it means that formatting succeeds
.
(
2
)
If it shows
"
Formatted completed with fragments le
"
,
it means formatting is completed
,
but there are still
some file fragments existing
.
The SD card cannot be formatted into the required format
,
please contact the
manufacturer of the card to fix it or replace it with a new card
.