Insta360 Titan - Page 197

4.1.3 [ Beginner ] Connection and stitching calibration
before live - streaming
1. Connection
Connect your computer or mobile phone to Insta 360 Titan in the same LAN , and here is how to connect :
( 1 ) Connect via LAN cables :
① Connect external network to router .
② 2 cables are separated from the router , with one connecting to Insta 360 Titan , and the other connecting the computer
( if external network connection succeeds , IP address on Insta 360 Titan will not appear as either 0.0.0.0 or 192.168.43.1,
otherwise , the connection fails ) .
③ Input IP address displayed on Insta 360 Titan to complete the connection .
④ Complete settings for your live - streaming .
( 2 ) Wireless connection of router :
① Connect external network to the WIFI router .
② Separate one LAN cable to connect Insta 360 Titan ( if external network connection succeeds , the IP address on
Insta 360 Titan will not appear as either 0.0.0.0 or 192.168.43.1, otherwise , the connection fails . )
③ Connect a mobile phone or computer via WIFI to the WI - FI router that has connected to Insta 360 Titan . Input ID
address displayed on Titan for connection .
④ Complete settings for your live - streaming .
( 3 ) 4 G Wireless card connection :
① Connect the 4 G router via cable to Insta 360 Titan ( if external network connection succeeds , IP address on Insta 360
Titan will not appear as either 0.0.0.0 or 192.168.43.1, otherwise , the connection fails ) .
② Connect a mobile phone or computer via WIFI to the 4 G Wireless card that has connected to Insta 360 Titan . Input ID
address displayed on Titan for connection .
③ Complete settings for your live - streaming .
2. Stitching Calibration :
Camera ' s internal stitching e ff ect depends on specific shooting scene . For example , cameras ‘ shooting quality may di ff er
between long shots and close - ups . Therefore , if users are not satisfied with real - time stitching e ff ect when previewing or
recording ( real - time stitching for live - streaming or video recording ) , they may use this function for calibration . ( Note : do
not calibrate stitching in environment without obvious feature points such as large white walls etc . )