12
Delay Start
Delay Start can be used with all Smart Programs with the exception of Sear/Sauté and Yogurt.
1. Connect the power cord to a 120V outlet. Multicooker will enter Standby mode by showing "OFF".
2. Select your desired Program.
3. Press + and – under Temp to set the temperature.
4. Press + and – under Time to set the cook time.
Note: You will not be able to return to this screen without cancelling the program entirely, so it is important to remember
to input your cooking time before setting the Delay Start timer.
5. Press Delay Start to turn the setting on. The LED above the key will light up and the display
will read "06:00".
6. Press + and – under Time to set the delay time in 30-minute increments. The number displayed on
the screen represents the amount of time before your meal will start cooking.
7. After 10 seconds, the multicooker will beep and the Delay Start countdown will begin.
Note: Changes to the Delay Start time may not be made once the timer has started. To adjust the time, press Cancel and enter
your new selections.
Temperature: Fahrenheit & Celsius
Press Cancel to ensure the multicooker is in Standby mode. Under Temp, press and hold the + and – keys
together for 5 seconds to toggle between °F and °C.
Sound
Sound OFF: Press and hold – under Time for 5 seconds. The display will show "SOFF".
Sound ON: Press and hold + under Time for 5 seconds. The display will show "S On".
Note: Error code alerts cannot be silenced.
To Next Page
Loading...
Need help?
General
