instantappliances.com | 13
Settings
Status messages
To do this… Do this!
Reset all smart programs.
In function selection mode, touch and
hold Cancel for 3 seconds. The cooking
times and temperatures for all Smart
Programs are restored to the factory
default settings.
The Omni Plus is in standby mode and ready to go!
A smart program is in the preheat stage.
Only applies to Air Fry, Roast and Bake.
The oven door is open. If the oven door remains open for over
5 minutes during cooking and/or 30 seconds during program
selection, the oven returns to standby mode.
The display shows the cooking time and on-screen messages.
Shows the oven's target cooking temperature.
Shows the active toasting darkness level from 1 to 5.
Food is ready to be ipped or rotated, as recommended by
your recipe.
Only applies to Air Fry, Roast and Bake, and won’t appear if
the rotisserie is on.
The Smart Program has nished!
To Next Page
Loading...
