12
Before you brew
Initial Cleaning
Before you brew your first cup of coffee, clean your Instant Solo Coffee
Maker. Run the following cleaning program without a coffee pod or the
reusable coffee pod.
1. Lift the water tank from the back of the coffee maker and remove
the water tank lid.
2. Fill the water tank with cold water to the MAX fill line as indicated
on the water tank.
3. Put the lid back onto the water tank and place the water tank back
onto the coffee maker.
4. Place a large mug which can hold at least 10 oz of liquid beneath
the brew spout and onto the drip tray.
5. Ensure the brewing lid is closed and securely latched. Press 8 oz button.
The key flashes as the water heats.
6. The 8 oz button will illuminate. The coffee maker begins a brewing
cycle and hot water will pour from the brew spot. After the brewing
cycle ends or is cancelled and the water stops dripping from the
spout, discard the water in the mug. To stop brewing at any time,
touch 8 oz again.
7. Place the mug back on the drip tray.
8. Touch 10 oz. The button flashes as the water heats.
9. The 10 oz. button will illuminate. The coffee maker begins a brewing
cycle and hot water will pour from the brew spot. After the brewing
cycle ends or is cancelled and the water stops dripping from the
spout, discard the water in the mug. To stop brewing at any time,
touch 10 oz again.
140-6012-01-0101_IB_SoloCoffeeMaker_US_Manual_FINAL.indd 12140-6012-01-0101_IB_SoloCoffeeMaker_US_Manual_FINAL.indd 12 7/16/21 1:29 PM7/16/21 1:29 PM
To Next Page
Loading...
Need help?
General
