14
Get Started
Replacing Trap & Extract filter
Visit instantpot.com.au to purchase compatible filters, designed to
work with your unit.
1. Unplug the Instant Vortex Plus from the electrical outlet.
2. Lift the filter housing up, from the top of the unit.
3. Remove the old filters and dispose of it properly. The filters are not
recyclable.
4. Remove two (2) new filters from packaging and insert them into the
filter housing.
5. Insert the filter housing back into the unit and plug the cooker back
into the electrical outlet.
6. Press the button “Bake” and “Reheat” together to reset the filter.
The filter LED on the top panel of the machine will be off. Now
you’re ready to cook.
7. The Trap & Extract filter will help reduce cooking odours and
aerosolised grease while you cook.
To Next Page
Loading...
Need help?
General