Smart Program Settings
12
Standby Mode
When the rice and grain cooker is plugged in, the display shows OFF to
indicate that it is in Standby mode.
You may select a Smart Program when in Standby mode.
Cancel
Press Cancel to stop a Smart Program at any time. The rice and grain cooker
returns to Standby mode and the display indicates OFF.
Start
Press Start when you are ready to begin a Smart Program.
−/+ Buttons
Use to increase or decrease the cooking time or Delay Start time of applicable
Smart Programs.
Smart Programs
For the cooking time and temperature associated with each Smart Program,
see Smart Programs and Cooking Ratios.
Adjust and Save Cooking Time
Select a Smart Program, then use the −/+ buttons to adjust the cooking time.
The adjusted cooking time is saved when the Smart Program begins.
Only applicable to Oatmeal, Steam and Slow Cook Smart Programs.
Adjust and Save Cooking Temperature
With the Smart Program selected, press the Smart Program button again to
toggle between HI (High) and LO (Low). The adjusted cooking temperature is
saved when the Smart Program begins.
Only applicable to Sauté, Slow Cook and Keep Warm Smart Programs.
To Next Page
Loading...
Need help?
General
