INSTEON 2243-222 Quick Start Guide

Insteon Hub
Quick Start Guide
Insteon Hub
Ethernet
Cable
Restart Set Button
Power
Cable
You’re done setting up your Insteon Hub;
now start adding devices.
Installation
On your iPhone or iPod touch,
download and install Insteon+ from the
App Store.
Connect your Hub to your router and a power
outlet using the cables provided. Avoid
switched outlets or power strips.
Download the App Create an Account Adding Hub Pro
Launch the App and allow Insteon+
access to HomeKit. Follow the on-screen
instructions to create an account.
Add HomeKit devices, including the Insteon
Hub, by tapping Add. For HomeKit devices,
enter the 8-digit Accessory Setup Code.
Linking
Unlinking
Idle
PowerUSB2
Don’t feel like searching? Scan the
QR Code and download the app.
Status LED

INSTEON 2243-222 Specifications

General

Model Number	2243-222
Category	Switch
Protocol	INSTEON
Voltage	120V AC
Load Rating (Incandescent)	600W
Load Rating (LED/CFL)	150W
Maximum Load	600W
Frequency	60Hz
Item Weight	0.5 lbs
Warranty	2 years
Type	Dimmer
Operating Temperature	32°F to 104°F (0°C to 40°C)