InStep Rocket - Assembly Instructions; Step 1: Unpack and Check Contents; Step 2: Open Trailer and Remove Canopy

3
ASSEMBLY AND OPERATING INSTRUCTIONS
STEP 1 Remove the trailer from the carton and compare the contents with the parts list
1A
1A. Remove all contents from inside the carton and place them on a clean flat surface. Compare them with
the parts list to make sure that no parts are missing. (Note: the canopy is inside the trailer cabin.)
WARNING Immediately discard all plastic bags and plastic wrapping materials!
STEP 2 Open trailer and remove canopy
2A
2B
2C
2A. Lift the side cabin frame with window up so that it folds open.
2B. Lift the other side cabin frame with window up so that it folds open.
2C. Remove the canopy from inside the trailer compartment and set it aside.