InStep Rocket User Manual

4
STEP 3 Link sling seat crossbar to side cabin frames
3A
3B
3C
3D
3A. Reach into the trailer, locate the sling seat and cross bar assembly and lift it up.
3B. Position the sling seat crossbar across the top of the trailer cabin frames.
3C. Slide the male joiner at the end of the cross bar into the female joiner on the cabin frame.
3D. Push the male joiner all the way down until secure. Repeat for the other side.
IMPORTANT! Pull up on both ends of the crossbar to make sure the joiners are secure!
STEP 4 Adjust the sling seat
4A
4B
4A. The underside of the front edge of the sling seat has two sets of adjustable straps, one behind the other.
4B. Tighten both sets of straps to provide support when children are seated in the trailer.
IMPORTANT! Loosen both sets of straps to allow the trailer to fold flatter for storage and transport.
Front
edge of
sling seat

InStep Rocket Specifications

General

Brand	InStep
Model	Rocket
Category	Stroller
Language	English