Instone INVENTOR PRO - Declaration; Legal Statement; Important Security Information

- 3 -
Declaration
All INVENTOR PRO 3D Printer will be tested and calibrated before delivery. With
more than 8-hour continuous printing test, the following phenomena are normal:
particle dust on the shell or the slight traces on the nozzle, etc.. Please read this
manual carefully before using the printer to avoid damaging both the body and
machine.
Legal Statement
We have all the rights to modify the relevant contents of this manual without
notice.
The machine case is flammable and there are heating components inside the
machine. So don’t leave the device unattended after power-on. If any abnormality is
found, please cut off the power supply in time to prevent the fire. Any accidents
caused by misoperation would not be assumed by us.
We are not responsible for any loss without following this manual (including
subsequent loss, misprints and publishing errors). No part of this manual can be
modified, photocopied, or translated without prior written authorization. This manual
is copyrighted and we reserves all the rights of the final explanation.
Important Security Information
Failure to follow the instructions in this manual may result in fire, equipment damage,
property loss or personal injury.
Before using the product, please refer to the Quick Start Guide and User's Manual.
Operation:
1.For INVENTOR PRO and power adapter, please keep the surrounding
temperature range 15~40
℃
, humidity range 20%~50%. Otherwise it may affect the
quality of the print model and even cause a security risk.
2.INVENTOR PRO 3D Printer can only use the company's standard power
adapter cable. The use of damaged cables, or power in damp environments may
damage the equipment or cause fire.
3.During the printing process, a slight odor is produced. The odor is non-toxic
but might cause slight discomfort to the human body. Therefore, it is recommended to
use in the well-ventilated environment.
4.Try to keep the printer away from strong airflow which might have a certain
impact on print quality.
5.Do not expose the printer to water or other liquids which might cause damage