Electromagnetic Compatibility
Where applicable, this equipment is designed to
comply with International Electromagnetic
Compatibility(EMC)standards.
To ensure reproduction of this EMC performance,
connect this equipment to a low impedance ground
connection.Typicalsuitableconnectionsare a ground
spikeorthesteelframeofabuilding.
Proprietary Rights Notice
Thisdocumentandtheinformationthatitcontainsare
the property of Il
linois Tool Works Inc. (ITW). Rights
to duplicate or otherwise copy this document and
rights to disclose the document and the information
that it contains to others and the right to use the
information contained therein may be acquired only
by written permission signed by a duly authorized
officerofITW.
Trademarks
Instron® is a r
egistered trademark of Illinois Tool
WorksInc.(ITW).Othernames,logos,iconsandmarks
identifying Instron products and services referenced
herein are trademarks of ITW and may not be used
withoutthepriorwrittenpermissionofITW.
Other product and company names used herein are
trademarks or trade names of their respectiv
e
companies.
© Copyright 2012 Illinois Tool Works Inc.
All rights reserved.
All of the specifications shown in this document
are subject to change without notice.
Original language
Product Support: www.instron.com
To Next Page
Loading...
