Calibration
2-13
Product Support: www.instron.com
the Calibration Wizard feature of the
Console software.
6. In the case of other controllers, consult
the controller’s operating instructions for
specific calibration methods appropriate
to your gauge.
7. The device is now ready to use.
Manual Calibration
If you wish to calibrate the Extensometer
manually, for instance because you need to
calibrate the device for use at an elevated
temperature, consult the documentation
supplied with your control system for the
appropriate procedure.
Temperature Calibration
The Extensometer may be used over a wide
range of temperatures. Ideally, you should
calibrate the gauge as close as possible to the
actual temperature at which you expect the
testing to take place. Any variation between
the testing temperature and the temperature
To Next Page
Loading...
