Need help?Do you have a question about the InstruStar ISDS205A and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Bandwidth | 100 MHz |
| Sample Rate | 1 GSa/s |
| Vertical Resolution | 8 bits |
| Trigger Modes | Auto, Normal, Single |
| Input Coupling | AC, DC, GND |
| Max Input Voltage | 400 V (DC + AC peak) |
| Weight | 2.5 kg |
| Display | 7-inch TFT LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Interface | USB, LAN |
| Input Impedance | 1MΩ |
Details the interface for the ISDS205A model, including input and output connectors.
Details the interface for the ISDS205B model, including oscilloscope, DDS, and power connectors.
Details the interface for the ISDS205C model, including oscilloscope and logic analyzer connections.
Details the interface for the ISDS205X model, showing oscilloscope, DDS, and logic analyzer ports.
Covers fundamental controls for the logic analyzer, including channel management and capture settings.
Instructions on how to record and manage data collected by the logic analyzer.
To Next Page
