Original Language - English
Electrical Receptacles: The agitator / airlock motor & each blower motor require a dedicated 115 volt
15 amp circuit.
Wired Remote Receptacle: Twist lock receptacle to plug in the wired remote.
Control Panel: The electrical panel, combined with the remote (wired and/or wireless), provides
operation of the machine.
1. Agitator Circuit Breaker- push to reset if tripped.
2. Power ON Button- energizes the Control Panel.
3. Rotary Control Switch- selects operation mode: Wireless Remote Control when operating from
GOWIRELESS Long Range Transmission wireless transmitter (optional), Wired Remote Control when
operating from wired remote, Off, Blower & Blower / Agitator when desiring to operate machine from
its control panel.
4. LRT Antenna- receives signal from Wireless LRT.
5. Learn Button- used in reprogramming transmitter/receiver.
6. Sync LED- indicates programming status of transmitter/receiver.
7. Blower #1 Circuit Breaker- push to reset if tripped.
8. Variable Speed Control- allows user to control output (speed) of Primary Blower.
9. Blower #2 Circuit Breaker- push to reset if tripped.
10. Blower #2 On/Off Switch- energizes Blower #2.
To Next Page
Loading...
