Integra DPS-5.4 - Frame advance;frame reverse; Looping a section of a disc

30
Playing discs—Continued
You can advance or back up a DVD disc frame-by-
frame. With Video CDs and VR format DVD-RWs, you
can only use frame advance.
The A-B Repeat function allows you to specify two
points (A and B) within a track (CD and Video CD) or
title (DVD) that form a loop which is played over and
over.
Note:
•You can’t use A-B Repeat with WMA/MP3 discs,
Video CDs in PBC 1mode, or unfinalized CD-R/RW
discs.
Frame advance/frame reverse
1
During playback, press Pause ( ).
2
Press or to reverse
or advance a frame at a time.
3
To resume normal playback, press
Play ( ).
Tips:
• The picture quality when using frame
reverse is not as good as frame
advance.
• Depending on the disc, normal play-
back may automatically resume when
a new chapter is reached.
• When changing direction with a DVD
disc, the picture may “move” in an
unexpected way. This is not a malfunc-
tion.
ChannelTV/Video
O/
TV Control
Clear
645
Dimmer
Menu
Setup
Top Menu
Return
Audio
Stop
Down Up
Play Pause
Angle Subtitle Zoom
Enter
78
9
0
/
Play
Pause
Pause
Play
Looping a section of a disc
1
During playback, press Play Mode
and select “A-B Repeat” from the
list of functions on the left.
2
Press Enter on “A (Start Point)” to
set the loop start point.
ChannelTV/Video
On/
TV Control
Clear
123
645
Repeat A
-
B
Random
Play Mode
Display
Dimmer
Menu
Setup
Top Menu
Return
Audio
Stop
Down Up
Play Pause
Angle Subtitle Zoom
Open/
Close
On Standby
Enter
78
9
0
Enter
///
Play Mode
A-B
Play Mode
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
Enter
A(Start Point)
B(End Point)
Off
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode