Integra DRX-2.1 User Manual

26
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc�|
> Basic Manual
Setting Item Default Value Setting Details
BLUETOOTH Main
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
BLUETOOTH
" is selected as
input for main room.
"Zone 2": Output when "
BLUETOOTH
" is selected
as input for ZONE2.
"Main/Zone 2": Output when "
BLUETOOTH
" is
selected as input for main room or ZONE2
.
■ 6� 12V Trigger B
Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER
OUT B jack. Different settings can be set for each input selector. You can enable power link
operation when you connect the unit and the external devices equipped with 12V trigger
input jack.
Setting Item Default Value Setting Details
Delay 1 sec Set after how many seconds the 12V trigger output
will occur in response to the unit's operation. As
some devices cause a large current when they turn
on, delay the output if such devices are connected.
Select a value between "0 sec" to "3 sec".
BD/DVD Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as
input
for main room.
"Zone 2": Output when "BD/DVD" is selected as
input
for ZONE2.
"Main/Zone 2": Output when "BD/DVD" is selected
as input for main room or ZONE2.
Setting Item Default Value Setting Details
CBL/SAT Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
CBL/SAT
" is selected as
input for
main room.
"Zone 2": Output when "
CBL/SAT
" is selected as
input for ZONE2.
"Main/Zone 2": Output when "
CBL/SAT
" is selected
as input for main room or ZONE2
.
GAME Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
GAME
" is selected as input
for main room.
"Zone 2": Output when "
GAME
" is selected as input
for ZONE2.
"Main/Zone 2": Output when "
GAME
" is selected as
input for main room or ZONE2
.
STRM BOX Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
STRM BOX
" is selected as
input for main room.
"Zone 2": Output when "
STRM BOX
" is selected as
input for ZONE2.
"Main/Zone 2": Output when "
STRM BOX
" is
selected as input for main room or ZONE2
.
PC Zone 2
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "
PC
" is selected as input for
main room.
"Zone 2": Output when "
PC
" is selected as input for
ZONE2.
"Main/Zone 2": Output when "
PC
" is selected as
input for main room or ZONE2
.

Integra DRX-2.1 Specifications

General

Brand	Integra
Model	DRX-2.1
Category	Stereo Receiver
Language	English